centos7搭建svn服务器及客户端设置
管理员 发布于 4年前   391
centos7搭建svn服务器及客户端设置
centos7貌似预装了svn服务(有待确认),因此我们直接启动该服务即可
一、svn服务端配置(服务器IP假设为192.168.100.1)
步骤1:创建存放代码库目录
mkdir -p /var/svn
步骤2:启动svn服务
svnserve -d -r /var/svn
步骤3:创建代码库something
[root@model ~]# cd /var/svn
[root@model svn]# svnadmin create something
[root@model svn]# cd something
[root@model something]# ls
conf db format hooks locks README.txt
[root@model something]# cd conf
[root@model conf]# ls
authz passwd svnserve.conf
步骤4:配置svnserve.conf文件
[root@model conf]# vi svnserve.conf
### This file controls the configuration of the svnserve daemon, if you
### use it to allow access to this repository. (If you only allow
### access through http: and/or file: URLs, then this file is
### irrelevant.)
### Visit http://subversion.apache.org/ for more information.
[general]
### The anon-access and auth-access options control access to the
### repository for unauthenticated (a.k.a. anonymous) users and
### authenticated users, respectively.
### Valid values are "write", "read", and "none".
### Setting the value to "none" prohibits both reading and writing;
### "read" allows read-only access, and "write" allows complete
### read/write access to the repository.
### The sample settings below are the defaults and specify that anonymous
### users have read-only access to the repository, while authenticated
### users have read and write access to the repository.
# anon-access = read
# auth-access = write
anon-access = none
auth-access = write
### The password-db option controls the location of the password
### database file. Unless you specify a path starting with a /,
### the file's location is relative to the directory containing
### this configuration file.
### If SASL is enabled (see below), this file will NOT be used.
### Uncomment the line below to use the default password file.
# password-db = passwd
password-db = passwd
### The authz-db option controls the location of the authorization
### rules for path-based access control. Unless you specify a path
### starting with a /, the file's location is relative to the the
### directory containing this file. If you don't specify an
### authz-db, no path-based access control is done.
### Uncomment the line below to use the default authorization file.
# authz-db = authz
authz-db = authz
### This option specifies the authentication realm of the repository.
### If two repositories have the same authentication realm, they should
### have the same password database, and vice versa. The default realm
### is repository's uuid.
# realm = My First Repository
#此选项指定的库的认证领域
raalm = /var/svn/something
### The force-username-case option causes svnserve to case-normalize
### usernames before comparing them against the authorization rules in the
### authz-db file configured above. Valid values are "upper" (to upper-
### case the usernames), "lower" (to lowercase the usernames), and
### "none" (to compare usernames as-is without case conversion, which
### is the default behavior).
# force-username-case = none
[sasl]
### This option specifies whether you want to use the Cyrus SASL
### library for authentication. Default is false.
### This section will be ignored if svnserve is not built with Cyrus
### SASL support; to check, run 'svnserve --version' and look for a line
### reading 'Cyrus SASL authentication is available.'
# use-sasl = true
### These options specify the desired strength of the security layer
### that you want SASL to provide. 0 means no encryption, 1 means
### integrity-checking only, values larger than 1 are correlated
"svnserve.conf" 71L, 3173C written
步骤5:配置passwd文件
[root@model conf]# vi passwd
### This file is an example password file for svnserve.
### Its format is similar to that of svnserve.conf. As shown in the
### example below it contains one section labelled [users].
### The name and password for each user follow, one account per line.
[users]
# harry = harryssecret
# sally = sallyssecret
user = 123456
"passwd" 11L, 326C written
步骤6:配置authz文件
[root@model conf]# vi authz
### This file is an example authorization file for svnserve.
### Its format is identical to that of mod_authz_svn authorization
### files.
### As shown below each section defines authorizations for the path and
### (optional) repository specified by the section name.
### The authorizations follow. An authorization line can refer to:
### - a single user,
### - a group of users defined in a special [groups] section,
### - an alias defined in a special [aliases] section,
### - all authenticated users, using the '$authenticated' token,
### - only anonymous users, using the '$anonymous' token,
### - anyone, using the '*' wildcard.
###
### A match can be inverted by prefixing the rule with '~'. Rules can
### grant read ('r') access, read-write ('rw') access, or no access
### ('').
[aliases]
# joe = /C=XZ/ST=Dessert/L=Snake City/O=Snake Oil, Ltd./OU=Research Institute/CN=Joe Average
[groups]
# harry_and_sally = harry,sally
# harry_sally_and_joe = harry,sally,&joe
admin = user
# [/foo/bar]
# harry = rw
# &joe = r
# * =
[/]
user = rw
# [repository:/baz/fuz]
# @harry_and_sally = rw
# * = r
[something:/]
@admin = rw
"authz" 35L, 1093C written
此处的意思是用户usr_0对目录[/](代码库something的根目录)下的所有文件,具有读(r)和写(w)的权限
步骤7:关闭防火墙及防火墙开机自启动
systemctl stop firewalld.service
systemctl disable firewalld.service
至此,svn服务端配置完毕
二、svn客户端配置(客户端IP假设为192.168.100.2)
步骤1:关闭防火墙
[root@localhost svn]# systemctl stop firewalld.service
[root@localhost svn]# systemctl disable firewalld.service
Removed symlink /etc/systemd/system/dbus-org.fedoraproject.FirewallD1.service.
Removed symlink /etc/systemd/system/basic.target.wants/firewalld.service.
步骤2:创建客户端svn上提取文件存放目录
[root@localhost /]# mkdir /svn
步骤3:登录svn服务器并检出something库中的文件
[root@localhost svn]# svn co --username user --password 123456 svn://192.168.100.1/something
-----------------------------------------------------------------------
注意! 你的密码,对于认证域:
<svn://192.168.100.1:3690> /var/svn/something
只能明文保存在磁盘上! 如果可能的话,请考虑配置你的系统,让 Subversion
可以保存加密后的密码。请参阅文档以获得详细信息。你可以通过在“/root/.subversion/servers”中设置选项“store-plaintext-passwords”为“yes”或“no”,
来避免再次出现此警告。
-----------------------------------------------------------------------
保存未加密的密码(yes/no)?n
A something/package
A something/package/apache-maven-3.5.0-bin.tar.gz
A something/package/mysql-5.6.37-linux-glibc2.12-x86_64.tar.gz
A something/package/jdk-8u141-linux-x64.gz
A something/package/apache-tomcat-7.0.79.tar.gz
取出版本 6。
[root@localhost svn]# ls
something
更新svn版本库
[root@localhost package]#
[root@localhost package]#
[root@localhost package]# svn up /svn/something
正在升级 '/svn/something':
认证领域: <svn://192.168.100.1:3690> /var/svn/something
“user”的密码:
-----------------------------------------------------------------------
注意! 你的密码,对于认证域:
<svn://192.168.100.1:3690> /var/svn/something
只能明文保存在磁盘上! 如果可能的话,请考虑配置你的系统,让 Subversion
可以保存加密后的密码。请参阅文档以获得详细信息。
你可以通过在“/root/.subversion/servers”中设置选项“store-plaintext-passwords”为“yes”或“no”,
来避免再次出现此警告。
-----------------------------------------------------------------------
保存未加密的密码(yes/no)?n
D jenkins.war
更新到版本 7。
请勿发布不友善或者负能量的内容。与人为善,比聪明更重要!
该博客于2020-12-7日,后端基于go语言的beego框架开发
前端页面使用Bootstrap可视化布局系统自动生成
是我仿的原来我的TP5框架写的博客,比较粗糙,底下是入口
侯体宗的博客
文章标签
友情链接